Trait ModifierExt 

pub trait ModifierExt {
    // Required methods
    fn window_insets_padding(self, insets: WindowInsets) -> Modifier;
    fn consume_window_insets(self, insets: WindowInsets) -> Modifier;
    fn window_insets_left_width(self, insets: WindowInsets) -> Modifier;
    fn window_insets_top_height(self, insets: WindowInsets) -> Modifier;
    fn window_insets_right_width(self, insets: WindowInsets) -> Modifier;
    fn window_insets_bottom_height(self, insets: WindowInsets) -> Modifier;
    fn padding(self, padding: Padding) -> Modifier;
    fn padding_all(self, padding: Dp) -> Modifier;
    fn padding_symmetric(self, horizontal: Dp, vertical: Dp) -> Modifier;
    fn offset(self, x: Dp, y: Dp) -> Modifier;
    fn size(self, width: Dp, height: Dp) -> Modifier;
    fn required_size(self, width: Dp, height: Dp) -> Modifier;
    fn required_width(self, width: Dp) -> Modifier;
    fn required_height(self, height: Dp) -> Modifier;
    fn default_min_size(self, min_width: Dp, min_height: Dp) -> Modifier;
    fn width(self, width: Dp) -> Modifier;
    fn height(self, height: Dp) -> Modifier;
    fn size_in(
        self,
        min_width: Option<Dp>,
        max_width: Option<Dp>,
        min_height: Option<Dp>,
        max_height: Option<Dp>,
    ) -> Modifier;
    fn constrain(
        self,
        width: Option<AxisConstraint>,
        height: Option<AxisConstraint>,
    ) -> Modifier;
    fn fill_max_width(self) -> Modifier;
    fn fill_max_height(self) -> Modifier;
    fn fill_max_size(self) -> Modifier;
    fn minimum_interactive_component_size(self) -> Modifier;
    fn weight(self, weight: f32) -> Modifier;
    fn align(self, alignment: Alignment) -> Modifier;
    fn draggable<C>(self, on_drag_delta: C) -> Modifier
       where C: Into<CallbackWith<DragDelta, ()>>;
    fn draggable_with(self, args: DraggableArgs) -> Modifier;
    fn semantics(self, args: SemanticsArgs) -> Modifier;
    fn clear_and_set_semantics(self, args: SemanticsArgs) -> Modifier;
}

Shared modifier extensions that are not tied to a specific design system.

Required Methods

fn window_insets_padding(self, insets: WindowInsets) -> Modifier

Pads and consumes the space not already occupied by enclosing inset modifiers.

fn consume_window_insets(self, insets: WindowInsets) -> Modifier

Marks inset space as occupied for nested padding and size modifiers.

fn window_insets_left_width(self, insets: WindowInsets) -> Modifier

Sets width to the remaining left window inset.

fn window_insets_top_height(self, insets: WindowInsets) -> Modifier

Sets height to the remaining top window inset.

fn window_insets_right_width(self, insets: WindowInsets) -> Modifier

Sets width to the remaining right window inset.

fn window_insets_bottom_height(self, insets: WindowInsets) -> Modifier

Sets height to the remaining bottom window inset.

fn padding(self, padding: Padding) -> Modifier

Adds padding around the content.

fn padding_all(self, padding: Dp) -> Modifier

Adds symmetric padding on all edges.

fn padding_symmetric(self, horizontal: Dp, vertical: Dp) -> Modifier

Adds symmetric padding for horizontal and vertical edges.

fn offset(self, x: Dp, y: Dp) -> Modifier

Offsets the content without affecting layout size.

fn size(self, width: Dp, height: Dp) -> Modifier

Constrains the content to an exact size when possible.

fn required_size(self, width: Dp, height: Dp) -> Modifier

Pins the content to an exact size regardless of incoming constraints.

fn required_width(self, width: Dp) -> Modifier

Pins the content width regardless of incoming constraints.

fn required_height(self, height: Dp) -> Modifier

Pins the content height regardless of incoming constraints.

fn default_min_size(self, min_width: Dp, min_height: Dp) -> Modifier

Applies a default minimum size only when the incoming axis leaves the minimum open, so an explicit outer size always wins.

fn width(self, width: Dp) -> Modifier

Constrains the content to an exact width when possible.

fn height(self, height: Dp) -> Modifier

Constrains the content to an exact height when possible.

fn size_in( self, min_width: Option<Dp>, max_width: Option<Dp>, min_height: Option<Dp>, max_height: Option<Dp>, ) -> Modifier

Constrains the content size within optional min/max bounds.

fn constrain( self, width: Option<AxisConstraint>, height: Option<AxisConstraint>, ) -> Modifier

Applies explicit width/height interval constraints.

fn fill_max_width(self) -> Modifier

Fills the available width within parent bounds.

fn fill_max_height(self) -> Modifier

Fills the available height within parent bounds.

fn fill_max_size(self) -> Modifier

Fills the available size within parent bounds.

fn minimum_interactive_component_size(self) -> Modifier

Enforces a minimum interactive size by expanding and centering content.

fn weight(self, weight: f32) -> Modifier

Provides weighted parent data for row and column layouts.

fn align(self, alignment: Alignment) -> Modifier

Provides alignment parent data for layered boxed layouts.

fn draggable<C>(self, on_drag_delta: C) -> Modifier

where C: Into<CallbackWith<DragDelta, ()>>,

Emits drag deltas for free-form dragging.

fn draggable_with(self, args: DraggableArgs) -> Modifier

Emits drag deltas with custom drag configuration.

fn semantics(self, args: SemanticsArgs) -> Modifier

Attaches accessibility semantics metadata to this subtree.

fn clear_and_set_semantics(self, args: SemanticsArgs) -> Modifier

Clears descendant semantics and applies the provided metadata.

Dyn Compatibility

This trait is not dyn compatible.

In older versions of Rust, dyn compatibility was called "object safety".

Implementations on Foreign Types

impl ModifierExt for Modifier

fn window_insets_padding(self, insets: WindowInsets) -> Modifier

fn consume_window_insets(self, insets: WindowInsets) -> Modifier

fn window_insets_left_width(self, insets: WindowInsets) -> Modifier

fn window_insets_top_height(self, insets: WindowInsets) -> Modifier

fn window_insets_right_width(self, insets: WindowInsets) -> Modifier

fn window_insets_bottom_height(self, insets: WindowInsets) -> Modifier

fn padding(self, padding: Padding) -> Modifier

fn padding_all(self, padding: Dp) -> Modifier

fn padding_symmetric(self, horizontal: Dp, vertical: Dp) -> Modifier

fn offset(self, x: Dp, y: Dp) -> Modifier

fn default_min_size(self, min_width: Dp, min_height: Dp) -> Modifier

fn size(self, width: Dp, height: Dp) -> Modifier

fn required_size(self, width: Dp, height: Dp) -> Modifier

fn required_width(self, width: Dp) -> Modifier

fn required_height(self, height: Dp) -> Modifier

fn width(self, width: Dp) -> Modifier

fn height(self, height: Dp) -> Modifier

fn size_in( self, min_width: Option<Dp>, max_width: Option<Dp>, min_height: Option<Dp>, max_height: Option<Dp>, ) -> Modifier

fn constrain( self, width: Option<AxisConstraint>, height: Option<AxisConstraint>, ) -> Modifier

fn fill_max_width(self) -> Modifier

fn fill_max_height(self) -> Modifier

fn fill_max_size(self) -> Modifier

fn minimum_interactive_component_size(self) -> Modifier

fn weight(self, weight: f32) -> Modifier

fn align(self, alignment: Alignment) -> Modifier

fn draggable<C>(self, on_drag_delta: C) -> Modifier

where C: Into<CallbackWith<DragDelta, ()>>,

fn draggable_with(self, args: DraggableArgs) -> Modifier

fn semantics(self, args: SemanticsArgs) -> Modifier

fn clear_and_set_semantics(self, args: SemanticsArgs) -> Modifier

Implementors